TaoTronics Receptor Bluetooth 4.2 para Auto, Manos Libres Bluetooth Receiver de Coche con 3.5mm Salida Estéreo Auxiliar,Receptor Bluetooth con Micrófono Incorporado para Sistema de Sonido de Audio

Características del Producto

• POWER: Maximum Power Output of 1500 Watts at 2 Ohms into one channel. MAX Power Output of 750 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
• HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the AR1500M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
• LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the AR1500M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
• LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
• SWITCHABLE BASS BOOST: Switchable Bass Boost allows you to boost the low bass +18db.
• DIMENSIONS: The AR1500M is 10.3 inches in Depth, 6.5 inches in Width and 2.6 inches in Height. It can be installed in a variety of different places due to its’ slim and compact design

Características del Producto

• Includes high-level input harness
• Low-level and speaker-line inputs
• 95W x 4 at 2ohm
• Bridgeable
• Auto signal sensing and turn on

Características del Producto

• 300 W MAX Power @ 2 Ohm x 2 Channels
• 150 W MAX Power @ 4 Ohm x 2 Channels
• 600 W MAX Bridged Power @ 4 Ohm x 1 Channels
• Full-Range, Class A / B Topology, MOSFET Power Supply
• Low and High Level Inputs, Variable Filter, Variable Bass Boost
• Remote Subwoofer Control

Características del Producto

• Power - 1500 Watts Max x 1 @2-Ohms, 700 Watts Max x 1 @4-Ohms
• Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
• Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
• Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
• Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
• Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it